RETRO FISH TOA 5'6" - TO GLUE BOTTOM PLYWOOD

To Glue Bottom Plywood (Work time – 1 ½ hours + 24 h glue drying time)

Once the fishbone is ready, internal struct. can be glued to the bottom plywood:

_ Lay down frames/Spine on bottom to mark out position on it using pencil

_ Place marked bottom plywood on the ART

_ Lay the polyurethane wood glue between mark lines in way of structure

_ press internal structure on bottom plywood using cross bar

_ wait for 24 h for drying glue time

Glue the frame to the bottom planks using the rocker table

Pressing the skin into the frame

Frame is now attached to the bottom planks